Oil to Gas Conversion Services in Bellingham, MA

Cut Your Heating Bills by 30%

Switch from expensive heating oil to efficient natural gas with our professional conversion services in Bellingham.
A utility room with tiled walls, featuring a white water heater, various pipes, valves, meters, and a ventilation duct. The open door leads to an adjacent room with white walls and a marble-style floor in Middlesex, MA.

Hear from Our Customers

A clean utility room in Norfolk, MA, with a gray furnace, metal ductwork, and water heater by a white wall; an electrical panel is mounted above light-colored wood flooring—perfect for a plumber Plymouth residents can trust.

Natural Gas Conversion Bellingham MA

What You Get After We Convert
Your heating bills drop significantly. No more scheduling oil deliveries or watching tank levels during cold snaps. Your basement gets that space back where the oil tank used to sit. You’ll have a heating system that fires up faster, runs cleaner, and needs less maintenance. Natural gas burns at over 90% efficiency compared to oil’s 50-80% efficiency, so you’re getting more heat for every dollar spent. The conversion pays for itself within a few years through lower monthly bills. Plus, your home value increases with modern, efficient heating that today’s buyers expect.

Plumbing Contractors Bellingham MA

Local Plumbers Since 2007
We’ve been serving Bellingham and the surrounding Plymouth County area since 2007. We started in new construction and shifted our focus to service and repairs because that’s where homeowners needed us most. Bellingham homeowners know us for transparent pricing and getting the job done right the first time. We’re the plumbers you call when you want honest answers, not inflated estimates. Our team understands the local building codes and works directly with utility companies to handle every step of your oil to gas conversion. We’ve helped dozens of Bellingham families make the switch and start saving money immediately.
A technician in red gloves and a blue uniform works on the internal components of a gas furnace in Bristol, carefully examining its circuit board.

Oil to Gas Conversion Process

Here's How We Handle Everything
First, we check if natural gas is available on your street and assess your current heating system. We handle all the paperwork with National Grid to bring gas service to your home if needed. Next, we remove your old oil tank and heating equipment safely. We coordinate any required inspections and ensure your new gas line meets all local codes. Our licensed electricians handle the electrical connections for your new system. We install your new high-efficiency gas boiler or furnace, test everything thoroughly, and show you how it works. Finally, we help you apply for all available Mass Save rebates and utility incentives to reduce your upfront costs.
A plumber in red overalls and gloves is working on copper pipes connected to a boiler or heating system in Bristol, MA, using a tool to adjust or repair the unit mounted on a tiled wall.

Explore More Services

Heating System Conversion Bellingham

What's Included in Your Conversion
Your conversion includes complete removal of the old oil system, professional installation of new gas equipment, and all necessary permits and inspections. We coordinate with National Grid for gas meter installation and handle the final inspection process. Bellingham residents benefit from Mass Save rebates up to $1,000 for standard conversions, and up to $4,000 if your heating system is over 30 years old. These programs are specifically designed to help Massachusetts homeowners upgrade to cleaner, more efficient heating. We provide a one-year warranty on all labor and help you understand your new system’s maintenance requirements. Your new gas heating system will be sized properly for your home and designed to handle Bellingham’s winter temperatures efficiently.
A gray HVAC furnace unit installed indoors on a clean, painted concrete floor in Middlesex and Suffolk County, with visible metal ductwork and electrical wiring attached to the side.

How much money will I save switching from oil to natural gas?

Most Bellingham homeowners save 20-30% on their annual heating costs after converting from oil to gas. Natural gas typically costs about 18% less than heating oil per BTU, and modern gas systems run at 90-95% efficiency compared to older oil systems at 70-80% efficiency. The exact savings depend on your home’s size, insulation, and current oil system efficiency. We can calculate your potential savings during our free estimate by reviewing your recent oil bills and assessing your current equipment. With Mass Save rebates covering much of the conversion cost, most families see the investment pay for itself within 3-5 years through lower heating bills.
Yes, Bellingham residents qualify for several rebate programs. Mass Save offers up to $1,000 in rebates for standard conversions, and up to $4,000 if you’re replacing a heating system that’s over 30 years old. National Grid also provides additional incentives for high-efficiency equipment installations. These rebates can cover 30-50% of your total conversion cost, making the switch much more affordable upfront. We handle all the rebate paperwork for you and can often apply the rebates directly to reduce your final bill. The key is using qualified equipment and licensed contractors like us to ensure you meet all program requirements.
A typical conversion takes 2-3 days once we have all permits and the gas connection ready. The timeline depends on whether gas is already available at your property and if we need to coordinate new service installation with National Grid. If gas isn’t available on your street yet, the utility company installation can add 2-4 weeks to the timeline. We coordinate all of this for you and keep you informed throughout the process. We schedule conversions during warmer months when possible to avoid any heating disruption. If we must work during heating season, we can often install temporary heating to keep you comfortable during the changeover.
Most homes in Bellingham can be converted from oil to gas, especially if natural gas service is available on your street. We evaluate your existing heating distribution system, electrical service, and available space for the new equipment. Homes with hot water radiators, baseboard heating, or forced air systems can typically be converted. The main considerations are adequate electrical service for the new equipment and proper venting for the gas appliances. During our free assessment, we’ll identify any modifications needed and provide a complete scope of work. Most conversions work with your existing distribution system, so you keep your current radiators or ductwork.
We handle complete removal and disposal of your old oil tank according to Massachusetts environmental regulations. This includes pumping out any remaining oil, cleaning the tank, and arranging for proper recycling of the metal. Underground tanks require additional soil testing and potential remediation if any leaks are discovered. Above-ground basement tanks are typically easier to remove and don’t require soil testing. Tank removal is included in our conversion service, and we coordinate all necessary permits and inspections with Bellingham’s building department. You’ll have documentation showing proper disposal for your records.
You can convert just your heating system initially and add other gas appliances later. Many Bellingham homeowners start with heating conversion and then add a gas water heater, stove, or fireplace over time. Converting your heating system first gives you immediate savings on your biggest energy expense. Once you have gas service to your home, adding other gas appliances is much simpler and less expensive. We can design your initial gas installation to accommodate future appliances, so you won’t need additional gas line work later. This approach lets you spread the costs over time while still getting the heating savings right away.

Request a FREE Quote