Oil to Gas Conversion in Foxborough, MA

Stop Overpaying for Heat This Winter

Switch to natural gas and save hundreds every year while enjoying cleaner, more reliable heating for your Foxborough home.
A utility room with tiled walls, featuring a white water heater, various pipes, valves, meters, and a ventilation duct. The open door leads to an adjacent room with white walls and a marble-style floor in Middlesex, MA.

Hear from Our Customers

A clean utility room in Norfolk, MA, with a gray furnace, metal ductwork, and water heater by a white wall; an electrical panel is mounted above light-colored wood flooring—perfect for a plumber Plymouth residents can trust.

Natural Gas Conversion Foxborough MA

Cut Your Heating Bills by $800+ Annually
You’re tired of watching your heating costs drain your bank account every winter. Oil prices keep climbing, and you’re stuck scheduling deliveries, monitoring tank levels, and worrying about running out of fuel when you need heat most. Natural gas changes everything. Your heating bills drop to around $800-900 per season instead of the $1,700+ you’re paying for oil. No more delivery trucks, no more tank monitoring, no more panic when the gauge hits empty during a February cold snap. The math is simple: natural gas costs about 18% less than oil to produce the same amount of heat. Modern gas systems run at up to 97% efficiency compared to oil’s 50-80%. That efficiency gap adds up to real money back in your pocket, month after month.

Foxborough Plumbing Contractors

18 Years of Straight Talk, Quality Work
We’ve been serving Foxborough homeowners since 2007. We’ve built our reputation on upfront pricing, no surprises, and work that lasts. You won’t get a sales pitch from us. You’ll get honest answers about what your conversion involves, what it costs, and what you can expect. We back every job with a 1-year labor warranty because we stand behind our work. Foxborough winters are tough on heating systems. We know because we’ve been fixing, installing, and converting them for nearly two decades. When you need reliable heat that won’t break the bank, we’re the team that gets it done right.
A technician in red gloves and a blue uniform works on the internal components of a gas furnace in Bristol, carefully examining its circuit board.

Gas Conversion Process Foxborough

Simple Process, Professional Results
Your oil to gas conversion starts with confirming natural gas availability on your street. We handle the utility coordination and paperwork to bring gas service to your home if it’s not already there. Next, we size your new equipment properly. No guessing, no overselling. We calculate exactly what your home needs based on square footage, insulation, and heating demands. The right size system runs efficiently and saves you money. Installation day means removing your old oil equipment and tank, installing your new gas system, and connecting everything safely. We test every connection, check all safety systems, and walk you through your new setup before we leave. Your home stays warm throughout the process, and you’ll have reliable heat that costs less to run from day one.

Explore More Services

Oil Gas Conversion Services MA

Complete Conversion, Zero Hassles
Your conversion includes everything: old equipment removal, new system installation, gas line connection, and safety testing. We coordinate with National Grid for your meter installation and handle all required inspections. Foxborough homeowners appreciate that we take care of the details. Oil tank removal and disposal, asbestos remediation if needed, electrical connections for your new system. You get one point of contact for the entire project instead of juggling multiple contractors. We also help you understand your new system. Gas heating is different from oil, and we make sure you know how to operate everything efficiently. Simple maintenance keeps your system running at peak performance, and we’re always available for questions or service calls.
A gray HVAC furnace unit installed indoors on a clean, painted concrete floor in Middlesex and Suffolk County, with visible metal ductwork and electrical wiring attached to the side.

How much money will I actually save switching from oil to gas in Foxborough?

Most Foxborough homeowners save $800-900 per heating season after converting from oil to natural gas. Oil heating typically costs around $1,700+ annually, while natural gas runs about $800-900 for the same period. The exact savings depend on your home size, insulation, and heating habits. Natural gas costs about 18% less than oil to produce the same amount of heat, and modern gas systems achieve up to 97% efficiency compared to oil’s 50-80% efficiency rating. These aren’t theoretical numbers. They’re based on actual Massachusetts Department of Energy Resources data and real-world performance from systems we’ve installed throughout the Foxborough area.
The conversion starts with confirming natural gas availability on your street and getting utility approval for service. If gas isn’t already at your property, we coordinate with National Grid to bring the line from the street to your home. We then remove your existing oil equipment, including the furnace or boiler and oil tank. The new gas system gets installed in the same general area, connected to your existing ductwork or radiators. All gas connections are pressure tested for safety, and we handle the required town inspections. The entire process typically takes 1-2 days for most homes. Your heat stays on during installation, and we test everything thoroughly before considering the job complete. You’ll also receive all warranty information and operating instructions for your new system.
Yes, natural gas is significantly more reliable than oil, especially during harsh New England winters. Gas flows continuously through underground pipes, so you never run out of fuel or need to schedule deliveries during storms. Oil systems depend on truck deliveries that can be delayed by weather, road conditions, or supply issues. When temperatures drop suddenly, oil demand spikes and delivery schedules get backed up. Gas systems avoid these problems entirely. Gas also burns cleaner and produces less soot, which means fewer maintenance issues and service calls. The underground distribution system is designed to handle peak winter demand, and utility companies maintain extensive backup systems to ensure continuous service.
Most oil to gas conversions in the Foxborough area pay for themselves within 2-4 years through energy savings alone. With annual savings of $800-900, the math works out quickly even after accounting for installation costs. The payback period depends on your current oil usage, the efficiency of your new gas system, and current fuel prices. Higher efficiency systems pay back faster because they use less fuel to heat your home. Beyond the direct fuel savings, you also eliminate oil delivery fees, tank maintenance costs, and the risk of expensive oil spills or tank replacement. These additional savings can significantly shorten your payback period.
We handle complete oil tank removal and disposal as part of your conversion service. Underground tanks require excavation and proper disposal according to Massachusetts environmental regulations. Above-ground tanks are drained, cleaned, and removed. Tank removal includes soil testing if required and coordination with local environmental authorities. We’re licensed for tank removal and know all the state requirements for proper disposal and site remediation. The space where your old oil tank was located can often be reclaimed for storage or other uses. Many Foxborough homeowners are surprised by how much basement space they gain after removing their oil equipment and tank.
Yes, oil to gas conversions require permits and inspections from the Town of Foxborough. We handle all permit applications and schedule the required inspections as part of our service. The process includes a gas permit for the new installation, electrical permits if wiring changes are needed, and a final inspection by the town’s code enforcement officer. National Grid also inspects their portion of the work before connecting your gas meter. We coordinate all inspections and make sure everything meets Massachusetts building codes and safety requirements. You don’t need to deal with multiple agencies or track inspection schedules – we handle the paperwork and coordination so your project stays on schedule.

Request a FREE Quote