Oil to Gas Conversion Services in Taunton, MA

Stop Overpaying for Heating Oil

Switch to natural gas and cut your heating bills by up to 75% while eliminating delivery hassles and tank maintenance forever.
A utility room with tiled walls, featuring a white water heater, various pipes, valves, meters, and a ventilation duct. The open door leads to an adjacent room with white walls and a marble-style floor in Middlesex, MA.

Hear from Our Customers

A clean utility room in Norfolk, MA, with a gray furnace, metal ductwork, and water heater by a white wall; an electrical panel is mounted above light-colored wood flooring—perfect for a plumber Plymouth residents can trust.

Natural Gas Conversion Taunton

What You Get After Converting

Your monthly heating bills drop dramatically. No more watching oil levels or scheduling emergency deliveries during snowstorms. No more worrying about tank leaks contaminating your property.

You get consistent, reliable heat that flows through underground pipes directly to your home. Your heating system runs cleaner and more efficiently, often reaching 95% efficiency compared to oil systems that typically run at 80% or less.

The space where your old oil tank sat becomes usable again. Your heating system requires less maintenance because natural gas burns cleaner than oil, meaning fewer service calls and lower repair costs over time.

Plumbing Contractors Taunton MA

Local Plumbers You Can Trust

We’ve been serving Plymouth County since 2007. We’ve helped hundreds of Taunton area homeowners make the switch from oil to gas heating.

Our team understands the unique challenges of heating homes in Massachusetts winters. We know the local building codes, work directly with utility companies, and handle all the paperwork for Mass Save rebates that can put up to $1,500 back in your pocket.

We’re the plumbing company that shows up when we say we will, gives you the real cost upfront, and backs our work with a one-year labor warranty. No surprises, no hidden fees, no upselling services you don’t need.

A technician in red gloves and a blue uniform works on the internal components of a gas furnace in Bristol, carefully examining its circuit board.

Oil to Gas Conversion Process

Here's Exactly What Happens

First, we assess your current heating system and home layout to determine what equipment you’ll need. We coordinate with your gas utility to ensure proper gas line installation from the street to your house.

Next, we remove your old oil heating equipment and safely dispose of it according to Massachusetts regulations. We install your new gas furnace or boiler, connecting it to your existing ductwork or radiator system. We also handle the chimney liner installation if your new system requires it.

Finally, we test everything to ensure your new system runs efficiently and safely. We walk you through the new controls, help you apply for available rebates, and schedule a follow-up to make sure everything is working perfectly. The whole process typically takes one to two days depending on your home’s setup.

A plumber in red overalls and gloves is working on copper pipes connected to a boiler or heating system in Bristol, MA, using a tool to adjust or repair the unit mounted on a tiled wall.

Explore More Services

About Emma Plumbing And Drain Services

Heating System Conversion Taunton

What's Included in Your Conversion

Your oil to gas conversion includes complete removal and disposal of your old oil equipment, professional installation of your new gas heating system, and all necessary permits and inspections. We coordinate directly with National Grid or your local gas utility for proper gas line installation.

Taunton homeowners benefit from our knowledge of local building codes and utility requirements. We handle the Mass Save rebate applications that can save you up to $1,500, plus we help you access zero-percent financing options that make the conversion even more affordable.

You also get our transparent pricing guarantee, meaning the price we quote is the price you pay. No surprise charges, no hidden fees for permits or disposal. We include a comprehensive warranty on our installation work and provide ongoing support if you have questions about your new system.

A gray HVAC furnace unit installed indoors on a clean, painted concrete floor in Middlesex and Suffolk County, with visible metal ductwork and electrical wiring attached to the side.

How much does oil to gas conversion cost in Taunton?

Oil to gas conversion typically costs between $5,000 and $15,000 in Massachusetts, depending on your home’s current setup and the equipment you choose. The biggest factors affecting cost are whether you need a new heating system (if yours is over 10 years old), gas line installation from the street, and potential chimney liner requirements.

However, Mass Save rebates can reduce your upfront cost by up to $1,500, and many homeowners qualify for zero-percent financing for up to seven years. When you factor in the annual savings on heating costs – often $1,000 or more per year – most conversions pay for themselves within five to seven years.

We provide detailed, upfront pricing so you know exactly what you’ll pay before we start any work. No hidden fees, no surprise charges for permits or disposal.

Most oil to gas conversions take one to two days to complete once your gas line is installed and active. The gas utility typically handles the gas line installation separately, which can take several weeks to schedule depending on demand in your area.

We coordinate the entire timeline for you, working directly with National Grid or your local gas utility to ensure everything happens in the right sequence. We’ll remove your old oil equipment, install your new gas system, handle all inspections, and test everything thoroughly before we consider the job complete.

The process moves faster if you’re part of a municipal gas expansion project, where multiple homes in your neighborhood are getting gas service at the same time. In these cases, utility companies often expedite the gas line installations.

Yes, most Taunton homeowners see significant savings after converting from oil to gas. Natural gas typically costs about half as much as heating oil per unit of heat produced, and gas prices are regulated by the state, so you won’t see the dramatic price spikes that oil users experience.

The average Massachusetts household using oil spends $2,000 or more per year on heating, while gas users typically spend around $700. Even accounting for the upfront conversion cost, most homeowners break even within five to seven years and then enjoy lower heating bills for the life of their system.

You’ll also save on maintenance costs because gas systems require less frequent service and repairs. No more oil filter changes, nozzle replacements, or annual chimney cleanings that oil systems require.

Massachusetts offers several programs to help offset conversion costs. Mass Save provides rebates up to $1,500 for high-efficiency gas boilers and up to $450 for gas furnaces. They also offer zero-percent financing for up to seven years for qualified homeowners.

Some gas utilities provide additional incentives, including free gas line installation if there’s an existing gas main near your home. Federal tax credits may also be available for high-efficiency systems with 95% or higher efficiency ratings.

We handle all the paperwork for available rebates and help you understand which programs you qualify for. Our experience with these programs means we know how to maximize your savings and ensure you receive all available incentives.

Natural gas is generally considered safer and more reliable than heating oil for home heating. Gas is delivered through underground pipelines, so you never have to worry about running out of fuel or scheduling deliveries during storms. The supply is consistent and regulated by the state.

Gas systems eliminate the risks associated with oil storage tanks, including potential leaks that can contaminate soil and groundwater. There’s no risk of oil spills in your basement or around your property, and you don’t have to worry about tank replacement every 15-20 years.

Modern gas heating systems also include multiple safety features, including automatic shut-off valves and carbon monoxide detection. Gas burns cleaner than oil, producing fewer emissions and requiring less maintenance to keep your system running safely and efficiently.

Whether you need a complete system replacement depends on the age and condition of your current equipment. If your oil furnace or boiler is less than 10 years old and in good condition, we may be able to convert the existing system to run on gas, which reduces the overall conversion cost.

However, if your system is older or if you want to maximize efficiency and take advantage of available rebates, installing a new high-efficiency gas system often makes more financial sense. New gas systems can achieve 95% efficiency or higher, compared to older oil systems that typically run at 80% efficiency or less.

We’ll assess your current system during our initial consultation and explain your options clearly. Sometimes the rebates and long-term energy savings make a new system the better choice, even if conversion is technically possible.

Request a FREE Quote